Join us for "Don's Tutorials" explaining the marquis® templates for fitting and the detailed glueing procedure (for the sport of endurance) for the MPGo!
This exciting adaptation to the scientifically engineered, marquis® supergrip hoof boots, will give you the competitive edge!
This boot gives maximum protection to the hoof yet allows the horse to perform to the max. during an endurance ride..no issues...no limitations!
The entire front of the hoof is free of buckles, bungees, flaps, straps, canvas, etc., meaning that there is nothing to break or fail when striking objects on the trail, or by forging into the heels of a front hoof.
The bolts on the bottom unscrew and the sole can be replaced. Or, the bolts can be replaced with tungsten carbide road nails which will last through many boots and increase the longevity of the sole.
Above photo shows 4 optional road nails in place of the sole screws.
Trotting on asphalt is not a worry.
The inside base that the sole screws into is a thick honeycomb frame that has a dense rubber frog cushion in the middle. When the MPGo! are applied the glue grips into the honeycomb and onto the hoof for a superior bond.
The strong but thin sides are glued firmly to the hoof wall meaning that there are no bungee screws, horseshoe nail clinches or steel shoe clips sticking out that can rip gaiters or skin off if they happen to brush too close. There is nothing on the sides but thin smooth rubber.
There is a strong but thin rear section up to the hairline and snug against the back of the bulbs providing protection from rocks and forging.
Ride with no worries of losing a boot or getting a stone bruise...
Just ride and enjoy!!
The MPGo! is an adaptation of the proven, original Marquis scientifically engineered modular hoof boot, and consists of the following marquis® parts. For the Marquis Slider, the sole plate is removed and the iron slider shoe applied.
shell
sole plate
sole screws (6, 4 of which may be replaced with optional road nails)
If the sole is replaced before the shell becomes worn then the user can extend the life of the boot while at the same time keeping the tread (traction, shock absorption, etc) in almost new condition thereby greatly reducing the overall cost of using the Marquis when compared to having to buy a completely new boot every time the tread gets worn.
The MPGo! Glue Kit #1 consists of the following:
1 glue gun (free with purchase of below)
3 Equi-build
2 Equi- pak
1 Superfast
100 mixing tips
$213.60 (does not include shipping)
You save $55.00 !!
MPGo Glue Kit #2
The MPGo Glue Kit #2 consists of the following:
3 Equi-build
2 Sole Guard
100 mixing tips
to order ...
phone 1 800 403-0689 or email info@StrideEquus.com
Session #1 Don's Tutorial Series
Making and Using the MPGo! Template
if the above link isn't working for you then try here
Session #2 Don's Tutorial Series
MPGo! Gluing - Inside Toe
Session #3 Don's Tutorial Series
MPGo! Gluing - Sides and Back
Session #4 Don's Tutorial Series
MPGo! - Soles
Session #5 Don's Tutorial Series
MPGo! Final Results
Session #6 Don's Tutorial Series
MPGo! Removal and Clean Up
Session #7 Don's Tutorial Series
MPGo! With Road Nails
Session #8 Don's Tutorial Series
MPGo! After Tejon 50
